Linux version 2.4.22-10mdk (nplanel@no.mandrakesoft.com) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 Thu Sep 18 12:30:58 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001feaa000 (usable) BIOS-e820: 000000001feaa000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 510MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 130730 zone(0): 4096 pages. zone(1): 126634 pages. zone(2): 0 pages. ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELL CPi R 0x27d30a0f ASL 0x00000061) @ 0x1fef0000 ACPI: FADT (v001 DELL CPi R 0x27d30a0f ASL 0x00000061) @ 0x1fef0400 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 ACPI: MADT not present Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=linux ro root=305 devfs=mount hdc=ide-scsi splash=silent ide_setup: hdc=ide-scsi bootsplash: silent mode. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1398.829 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2791.83 BogoMIPS Memory: 513352k/522920k available (1508k kernel code, 9180k reserved, -1961k data, 156k init, 0k highmem, 0k BadRAM) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000 CPU: Common caps: a7e9fbbf 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1398.8101 MHz. ..... host bus clock speed is 99.9150 MHz. cpu: 0, clocks: 999150, slice: 499575 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030813 PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=1 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! schedule_task(): keventd has not started ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 (bios) S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7, enabled at IRQ 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 1024 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHT2030AT, ATA DISK drive blk: queue c0180d20, I/O limit 4095Mb (mask 0xffffffff) hdc: HL-DT-STCD-RW/DVD-ROM GCC-4241N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > ide: late registration of driver. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Swsusp 1.0.3: Missing or invalid swap partition location (resume= parameter). Disabled. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 301k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 156k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 12:42:04 Sep 18 2003 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xbf80, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xbf40, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xbf20, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 5, pci mem e086ec00 usb.c: new USB bus registered, assigned bus number 4 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. PCI: 00:1d.7 PCI cache line size corrected to 32. ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 6 ports detected usbdevfs: remount parameter error EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal Adding Swap: 506008k swap-space (priority -1) SCSI subsystem driver Revision: 1.00 hdc: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: A100 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: A100 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: A100 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: A100 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: A100 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: A100 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: A100 Type: CD-ROM ANSI SCSI revision: 02 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.4a [Flags: R/O MODULE]. NTFS volume version 3.1. eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:0D:56:7D:21:0A, IRQ 9. Board assembly 000000-020, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). ndiswrapper version 0.3 loaded NdisWriteConfiguration --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisInitializeString --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisInitializeString --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisInitializeString --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisInitializeString --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisInitializeString --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisInitializeString --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisInitializeString --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- NdisWriteConfiguration --UNIMPLEMENTED-- eth1: power management not possible